Shinhoo wall hung gas boiler pump works with wet rotor structure by using asynchronous motor and power supply of AC 230V/50HZ.The pump assembled on the hydraulic module of wall hung gas boiler is applied to heating system. IT is composed of stator, rotor, shield cover, vent valve and so on. 1.Sealing: stator and rotor sealed up with stainless steel shield cover, integral structure sealed up withhe...
Shinhoo pump are well known as its high quality with competitive price, so does its high efficiency circulation pump. Shinhoo high efficiency circulating pump is high efficiency pump for water circulation, which features well-designed compact structure, integrated controller and frequency converter. It is easy for installation and operation in most fields of applications. I...
Shinhoo high efficiency circulation pump can be widely used in many fields as follow: 1. System with constant or variable flow 2. System with variable temperature liquid 3. System with night mode 4. Air conditioning and cooling system 5. Industrial circulation system 6. Domestic hot water and drinking water supply system &emsp...
High efficiency gas boiler pump is one of the most famous high efficiency pump in Shinhoo. It is operated by using permanent magnet asynchronous motor and power supply of AC230V/50Hz. The efficiency can achieve A- class energy saving standard. The bearing is lubricated by circulated liquid. Compact structure design, integrated frequency convert and control with a variety of modes, make the i...
AS one of the most famous water circulation pump factory,Shinhoo offers a very flexible standard program of component solutions, including circulator pumps, motors, cables, connectors, control systems, etc. These standard components can be mixed and matched to thousands of different product variants. So in most cases we are able to meet your requirements with standard solution. If our standard sol...
There are several reasons that cause water circulator pump do not start. 1. Problems with power supply: You should check the plug and socket and the cable. Check circuit breaker in electrical panel. 2. Capacitor not working: Needs a new capacitor, not expensive. 3. Air pressure in water pressure tank too high: Reset air pressure in pressure tank. 4. ...
There are mainly four reasons that cause canned motor pump can not pump water 1. Water or air leakage in the pipeline: The nut may not be tightened tightly during installation. If the leakage is not serious, apply cement or cement slurry mixed with asphalt oil on the leaking or leaking place. Serious water leakage must be re-disassembled. 2. The water circulator...
High pressure centrifugal pump working principle :Relying on the action of the rotating impeller on the liquid to transfer the mechanical energy of the prime mover to the liquid. Due to the action of the liquid flowing from the impeller inlet to the outlet, its speed and pressure energy are both increased, and the liquid removed by the impeller passes through In the press-out chamber, most of the ...
IPv6 